Concrete Drum Mixers

Specifications
1 Cab and Chassis
1.1. Client to specify preferred cab and chassis.

2 Bowl
2.1. Technical details: Echar Construction Equipment Manufacturers cc – Body Building & Manufacturer NATIS No. 9033610230022 1)
2.2. Capacity of drum 6 mᵌ, 5 mm 300WA plate for outer shell of the drum & dome 6 mm 300WA
2.3. Track ring – forged solid seamless machined, hardened, tempered, quenched and tapered Mat EN19 (Certificate available on request)
2.4. 4 mm Domex blades c/w 25×10 mm flat bar for blade capping ¾ of the drum from dish-end to discharge of the drum and balance of the capping 16 mm round bar
2.5. Gearbox mounting flange twenty-four holes takes M16X60 Grade 10.9 bolts
2.6. Drum incorporates two inspection covers
2.7. Sub-frame and side mounting plates 6 mm Domex plate
2.8. M20 high tensile U-bolts to hold down the front and rear pedestal

3 Hydraulics
3.1. PMP Transmission-drive c/w 2-year warranty
3.2. PMH 75CC hydraulic motor c/w 1-year warranty
3.3. PMH 90CC hydraulic pump c/w 1-year warranty
3.4. Overhead hydraulic oil cooler c/w suction filter, breather & ext. pipe

4 Wheel guards and bumpers
4.1. Certified underrun bumper
4.2. Reflective chevron and number plate fitting
4.3. Plastic waterproof LED light holders, l.h.s. two-hole box both sides and reverse light separate
4.4. Adjustable, removable light weight plastic mudguards c/w brackets
4.5. Rubber mud flaps not fixed to the mud flap

5 Chutes
5.1. Adjustable & removable vee chute c/w liner plate
5.2. Swivel & removable feed hopper c/w liner plate
5.3. Swivel discharge chute c/w Domex folding chute & Domex liner in main chute
5.4. X1 Domex extension chutes & ext. chutes storage brackets
5.5. Locking & removable swivel arm for discharge chute & adjustable & removable heavy-duty screw lock

6 Attachment and controls
6.1. Adjustable & removable drum safety strap
6.2. 200 diameter drum rollers for 6mᵌ concrete mixer drum
6.3. Adjustable & removable drum roller brackets, easy access to grease
6.4. Heavy duty manual operated drum control direction handle & cable c/w rose eye at the hydraulic pump. Electric speed control box
6.5. 23T coupling fitted at the hydraulic pump for the PTO
6.6. All chassis mounting bolts are M16 flanged bolts & nuts Grade 10.9

7 Safety
7.1. Fitted with reflective tape
7.2. Fitted with rectangular reflectors e.g. Mudguards & pump mounting bracket
7.3. Reverse warning alarm
7.4. Fitted with prop-shaft guard

8 Ancillary
8.1. 150 litre aluminium water tank fitted in front of rear pedestal c/w x2 pressure relieve valves and additional valve to release air in tank before filling with water. This tank has a pressure test certificate provided
8.2. Air regulator & control switch for the water tank
8.3. ¾ inch green line water hose c/w ¾ inch ball valve & brass fitting at the end of the hose
8.4. Easy access water filling point for water tank
8.5. Complete mixer unit primer & final paint white 2K paint
8.6. Replacement parts in stock, bowl replacement also available

9 Legal
9.1. Homologated for on road use in New Zealand
9.2. Training included with unit
9.3. 12 month in-parts warranty on defects and workmanship.
9.4. Illustrated maintenance and operations manual